Bay Networks 5399 Manual page 110

Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
4-36
Mode Box
The box defines the type of access available on a port. This box
Mode
includes the buttons:
• allows an ISDN Primary Rate RAC to identify an
Autodetect
incoming packet's protocol and to convert it to IPX, PPP, ARAP
or CLI.
• provides access to modems, serial line printers, and other
Serial
serial devices.
• specifies that a connection can perform as a network
PPP
interface using PPP.
• allows dial-in Novell access with the Fastlink II client.
IPX
• automatically connects a user to a host via the
Telnet
command. You can specify the host and arguments in the
t box
Telne Argument
• specifies that a call can perform as a network interface
SLIP
using SLIP.
• allows a terminal or incoming modem access to the RAC
CLI
Command Line Interface (CLI). CLI provides access to the
network and connections to other hosts via the t
and
rlogin, tn3270
• specifies that a connection can perform as a network
ARAP
interface using ARAP.
• automatically connects a user to a host via the rlogin
Rlogin
command. You can specify the host and arguments in the
box Argument field.
Telnet
• indicates that one or more RACs you selected currently
Other
use modes that differ from the options displayed in the Mode
box. You can use the
Customize mode to check these values, or you can select
another option here. You cannot select the
field.
commands.
command in Annex Manager
Set
telnet
Rlogin/
elnet, connect,
Rlogin/
button.
Other