Bay Networks 5399 Manual page 214

Appendix A RAC Parameters
CallDef_net_inactivity_
units
CallDef_newline_
terminal
CallDef_output _ flow _
control
Managing Remote Access Concentrators Using Annex Manager
A-24
determines the unit of time used for the inactivity timer of a RAC or an ISDN
Primary Rate RAC.
Type
RAC
Values
minutes or seconds
Default
minutes
Lists
RAC Only, PPP, SLIP, Idle Timer, Call Defaults, Sync Call
Defaults
interprets carriage returns and line feeds for CLI. When you enter
carriage return or a line feed terminates the input line and a carriage return
followed by a line feed terminates output lines. When you enter
feed terminates both the input and the output lines.
Type RAC
Values enabled or disabled
Default disabled
Lists RAC Only, Call Defaults, Cmd Line Editing
defines the method that a device uses to start or stop output from a RAC or an
ISDN Primary Rate RAC. You can choose:
• to disable flow control.
none
• to designate flow control by recognizing xon and xoff
start/stop
characters.
• to indicate that flow control is delegated to a lower level.
eia
Type RAC
Values none, XonXoff, hardware
Default hardware
Lists RAC Only, Flow Control, Modem, Call Defaults
, a
disabled
, a line
enabled