Bay Networks 5399 Manual page 196

Appendix A RAC Parameters
at_security
attn _ string
authoritative_agent
authorized_groups
Managing Remote Access Concentrators Using Annex Manager
A-6
turns on ACP service for an AppleTalk session. When you choose
this parameter and for
enable_security
information about the client, including authentication, logging, and zone access
information. If you choose
Type
Async
Values
enabled or disabled
Default disabled
Lists Async Port, AppleTalk
defines a control character sequence that returns users to the CLI prompt. Users
can define a Annex Managerrary control character sequence using the CLI
command.
attn
Type Async
Value
+ any character, up to 16 characters
Ctrl
Default
" " (null string) or
Lists
Async Port, Command LIne Editing, Modem, Modem
Internal
allows a RAC to send an ICMP Address Mask reply to a host that broadcasts a
subnet mask request.
Type
RAC
Values enabled or disabled
Default enabled
Lists RAC Only, Basic RAC
specifies the LAT protocol remote group codes that are accessible to users on a
RAC port. You can enter
(e.g., , , ) or a range of numbers separated by dashes
1 5 7
(e.g., ).
1, 5, 200-255
Type Async
Values all, none, numbers between 0 and 255
Default none
Lists Async Port, LAT
, the RAC uses ACP to get security
, the RAC uses only local security.
disabled
+ (for vcli connections)
Ctrl A
, , a series of numbers separated by commas
all none
for
enabled
stty