Bay Networks 5399 Manual page 260

Appendix A RAC Parameters
password
password_limit
phone_number
port_encoding
Managing Remote Access Concentrators Using Annex Manager
A-70
modifies the RAC administrative password used for access to the superuser CLI
commands and for administrative access to a RAC. This password overrides the
CLI lock and virtual CLI passwords. For security reasons, Annex Manager
displays this value as
set
Type
RAC
Values
0 to 15 characters
Default unset
Lists RAC Only, Security
defines the maximum number of times a user can attempt to enter a password
before a RAC resets the port. Entering
default value).
Type RAC
Values 0 through 10
Default 3
Lists RAC Only
defines the default phone number used with demand dialing on the port. The
number you enter must be compatible with the modem connected to the port.
Type Async
Values 0 to 32
Default " " (null string)
Lists
Async Port, PPP, SLIP
has two settings:
1) Device - When the parameter is set to this value (which is also the default)
the NAS-Port attribute in conjunction with the NAS-Port-Type attribute defines
the port being used for that session.
2) Physical Port (corresponds to a hardware device)
NAS-Port-Type
Async
or .
unset
sets the limit to 3 (the Annex Manager
0
NAS-Port
1-46(T1)
1-48(Channelized T1)
1-62(E1)
1-64(Channelized E1)