Bay Networks 5399 Manual page 208

Appendix A RAC Parameters
CallDef_inactivity_timer
CallDef_input_is_
activity
CallDef_input _ start _
char
Managing Remote Access Concentrators Using Annex Manager
A-18
specifies the number of minutes that a RAC or an ISDN Primary Rate RAC call
can remain inactive. If the timer expires, the RAC terminates the call. You can
use
CallDef_input_is_activity
activity. If you set these parameters to
activity. To reset a call regardless of any activity, enter a number of minutes here,
set
CallDef_input_is_activity
Type RAC
Values 0 to 255 minutes
Default 0 (timer disabled)
Lists RAC Only, Call Defaults, Idle Timer, Modem, Modem
Internal
defines activity as input. If you choose
resets the inactivity timer to 0 when it receives input through an established call.
Type RAC
Values enabled or disabled
Default enabled
Lists RAC Only, Call Defaults, Dedicated Port, Idle Timer,
Modem
defines the control character sequence that restarts input if
CallDef_port_input_flow_control
Type
RAC
Value
+ any character
Ctrl
Default
+ (displays as ^Q)
Ctrl Q
Lists RAC Only, Call Defaults, Flow Control
and
CallDef_output_is_activity
, the timer runs independent of
disabled
and
CallDef_output_is_activity
, the ISDN Primary Rate RAC
enabled
is set to .
xonXoff
to define incoming call
to .
disabled