Bay Networks 5399 Manual page 247

load_dump_sequence
local_address
location
lock_enable
specifies available network interfaces and the order in which they are used for a
down-line load or an up-line dump. You can list more than one interface by using
commas to separate interface names. You can enter:
• to specify a local area network.
net
•
sl + port number
and a port number, you must enter an address in the
slip_load_dump_host
• to instruct a RAC to boot its image from the Flash ROMs.
self
Since the RAC cannot dump back to itself, you should include
a secondary interface here by entering
number.
Type RAC
Value net, sl+ port number, self
Default net
Lists RAC Only, Basic RAC
defines the IP address for the port on the RAC side of the link. This IP address
is used only when
mode
Type Async
Values
IP address
Default
0.0.0.0
Lists
Async Port, PPP, SLIP
defines a port location or description that displays at the CLI
Type
Async
Values
0 to 16 characters
Default
" " (null string)
Lists
Async Port, Basic Async Port
allows any port to use the DECServer LOCK command.
Type
RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only, Security
Managing Remote Access Concentrators Using Annex Manager
(e.g., ) to specify a SLIP line. If you enter
sl2
parameter.
is set to , or
slip ppp, autodetect
Appendix A RAC Parameters
sl
or
self, net self,sl+port
.
command.
who
A-57