Bay Networks 5399 Manual page 251

metric
min_unique_hostnames
mode
defines the hop count to the remote end of the serial line when
or . Modify this parameter only if you want the RAC to use a route other than
ppp
the SLIP or PPP interfaces to the remote end.
Type
Async
Values
1 to 15
Default
1
Lists Async Port, PPP, SLIP
specifies whether you can identify a host in the host table by entering a minimal
string rather than the full host name.
Type RAC
Values enabled or disabled
Default disabled
Lists RAC Only, Modem
sets the mode for access to an asynchronous port. You can enter:
• to allow a port connected to a terminal or incoming modem
cli
access to CLI. CLI provides access to the network and
connections to other hosts via the
commands
tn3270
The
is set to an appropriate value.
• to indicate that a port provides access to modems, serial
slave
line printers, and other serial devices attached to an outgoing
port. It does not provide access to the CLI.
• to allow slave and CLI capabilities. If a connection is
adaptive
initiated via a RAC, the port enters CLI mode. If a connection
is initiated via a port server, the port enters slave mode.
Managing Remote Access Concentrators Using Annex Manager
Telnet
.
command is available only when
tn3270
Appendix A RAC Parameters
is set to
mode
, connect , rlogin and
option_key
slip
A-61