Bay Networks 5399 Manual page 254

Appendix A RAC Parameters
mop_login_timer
mop_password
mop_pref_host
motd_file
Managing Remote Access Concentrators Using Annex Manager
A-64
specifies the number of minutes a port using a VMS interface can remain inactive.
This parameter works only when
to 30 minutes (the Annex Manager default value).
Type
RAC
Values
0 through 60 minutes
Default
30 minutes
Lists RAC Only, MOP
contains the MOP maintenance password. This is an 8-byte password, where
each byte consists of two hexadecimal digits. For security reasons, Annex
Manager displays values as
Type RAC
Values 0 to 16 characters
Default unset
Lists RAC Only, MOP
contains the Ethernet address of the preferred MOP load or dump host. This
address consists of six parts separated by dashes. Each part contains a
hexadecimal value.
Type RAC
Values Ethernet address
Default 00-00-00-00-00-00
Lists
RAC Only, MOP
contains the message-of-the-day file name that is maintained on the load host.
This file resides in the directory you choose during the host installation process
(typically
/usr/spool/erpcd/bfs
Type
RAC
Values
0 to 16 characters
Default
motd
Lists
RAC Only, Basic RAC
is set to
cli_interface
or .
set unset
).
. Entering sets the timer
vci 0