Attaching Headers; Attaching Header Boots - MacDon M Series Unloading And Assembly Instructions

3.21 Attaching Headers

3.21.1 Attaching Header Boots

Header boots are required to attach a D-Series draper header to the windrower. Attach header boots (supplied
with header) to windrower lift linkage if not already installed.
CAUTION
To prevent damage to the lift system when lowering
header lift linkages without a header or weight
box attached to the windrower, ensure the float
engagement pin is installed in storage position (B)
and NOT in engaged position (A).
1. Remove pin (B) from boot (A).
2. Position boot (B) onto lift linkage (A) and reinstall
pin (C). Pin may be installed from either side of boot.
3. Secure pin (C) with hairpin (D).
4. Repeat for opposite side.
147962
ASSEMBLING THE WINDROWER
Figure 3.155: Header Float Linkage
Figure 3.156: Header Boot
Figure 3.157: Header Boot
97
Revision A