MacDon M Series Unloading And Assembly Instructions page 173

4. Press right (C) arrow select YES. Press SELECT (D).
• DISPLAY LANGUAGE? is displayed on the
upper line.
• Default language is displayed on the lower line.
5. Press left (B) or
preferred language.
NOTE:
English, Russian, and Spanish language options
are available on windrowers. Not all language
options are available on all windrowers.
6. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next CAB DISPLAY
SETUP? action.
147962
CAB DISPLAY MODULE (CDM)
right (C) arrow to select
Figure 4.9: M105 Display Language
Figure 4.10: M155 Display Language
Figure 4.11: M205 CDM Programming Buttons
159
Revision A