7. Press SELECT (E) until ACTIVATE DWA DRV is
displayed on the upper line.
CAUTION
Check to be sure all bystanders have cleared the area.
IMPORTANT:
Do NOT over-speed the DWA drive.
8. Press and hold HAZARD (C) button.
• Press left (B) arrow to decrease DWA drive speed.
• Press right (D) arrow to increase DWA drive speed.
Verify the DWA drive is functioning properly.
9. Release the HAZARD (C) button.
will stop.
10. Press
PROGRAM
Mode or press SELECT (E) to proceed to next
ACTIVATE FUNCTION.
147962
CAB DISPLAY MODULE (CDM)
The DWA drive
(A)
to
exit
Programming
Figure 4.380: M155 DWA Drive
Figure 4.381: M205 DWA Drive
317
Revision A