MacDon M Series Unloading And Assembly Instructions page 258

6. Press SELECT (D) until REEL FORE/AFT is displayed
on the upper line.
• ENABLED/LOCKED is displayed on the lower line.
7. Press left (B) arrow to enable REEL FORE/AFT
control switch.
Press right (C) arrow to lock REEL FORE/AFT
control switch.
8. Press PROGRAM (A) to exit Programming Mode, or
press SELECT (D) to proceed to next WINDROWER
SETUP action.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.209: M105 Reel Fore-Aft Control Lock
Figure 4.210: M155 Reel Fore-Aft Control Lock
Figure 4.211: M205 Reel Fore-Aft Control Lock
244
Revision A