MacDon M Series Unloading And Assembly Instructions page 358

Self-propelled windrower

Hide thumbs Also See for M Series:

Table of Contents

3. Turn the road light switch (A) to the ON position and

ensure the front road lights (B) and rear red tail/brake

lights (C) (if equipped) are functioning.

4. Activate the high/low switch (D) and check lights.

5. Activate the amber turn signal/hazard warning

lights (E) using switches on the cab display

module (CDM) and check lights.

6. Turn off lights.

PERFORMING PREDELIVERY CHECKS

Figure 5.38: M155/M205 Exterior Lights – Cab

Troubleshooting