MacDon M Series Unloading And Assembly Instructions page 195

4. Press right (B) arrow to select YES. Press SELECT (C).
• TO CALIBRATE SELECT is displayed in upper line.
5. Press left (A) or right (B) arrow until HEADER FLOAT
is displayed on the lower line. Press SELECT (C).
• CALIBRATING
upper line.
• PRESS FLOAT + TO START is displayed on the
lower line.
CAUTION
Check to be sure all bystanders have cleared the area.
147962
CAB DISPLAY MODULE (CDM)
FLOAT is displayed on the
Figure 4.66: M155 Header Float
Figure 4.67: M205 Header Float
181
Revision A