MacDon M Series Unloading And Assembly Instructions page 185

5. Press SELECT (D) until DISPLAY CONTRAST is
displayed on the upper line.
• Default setting is displayed on the lower line.
6. Press left (B) or right (C) arrows to adjust
display contrast.
7. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next CAB DISPLAY
SETUP? action.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.45: M105 Display Contrast
Figure 4.46: M155 Display Contrast
Figure 4.47: M205 Display Contrast
171
Revision A