MacDon M Series Unloading And Assembly Instructions page 145

CAUTION
Check to be sure all bystanders have cleared the area.
18. Start the engine and activate the HEADER DOWN
switch (A) on the GSL to fully lower the header.
19. Stop engine and remove key from ignition.
20. Connect header drive hoses (A) and electrical
harness (B) to header. Refer to the draper header
operator's manual.
147962
ASSEMBLING THE WINDROWER
Figure 3.245: Ground Speed Lever
Figure 3.246: Header Drive Hoses and Harness
131
Revision A