20. Retrieve the two motor case drain hoses (MD #111312)
at the front frame and the 7/8 in. tee fitting (B) on the
hose from the pump.
21. Remove the caps (A) from the hoses only.
22. Remove one cap from tee fitting (A) and quickly attach
hose to minimize oil spillage.
23. Remove second cap from tee fitting (A) and quickly
connect other hose.
24. Tighten fittings.
147962
ASSEMBLING THE WINDROWER
Figure 3.69: Motor Case Drain Hoses
Figure 3.70: Tee Fitting
56
Revision A