Checking Engine Warning Lights; Checking Fuel Level On An M105 - MacDon M Series Unloading And Assembly Instructions

5.11.1 Checking Engine Warning Lights

1. Turn ignition key (A) to RUN position. A single loud
tone will be audible and the engine warning lights (B)
will illuminate.
2. Turn ignition key (A) to OFF position.

5.11.2 Checking Fuel Level on an M105

1. Turn the ignition key (A) to the RUN position.
2. Check the fuel level by pressing the selector switch (B)
on the cab display module (CDM) until the FUEL
LEVEL is displayed at (C). If required, add sufficient
fuel for a 15 minute run.
147962
PERFORMING PREDELIVERY CHECKS
336
Figure 5.22: M155/M205 Operator Console
Figure 5.23: M105 Operator Console
Figure 5.24: Cab Display Module (CDM)
Revision A