MacDon M Series Unloading And Assembly Instructions page 262

6. Press SELECT (D) until HEADER TILT is displayed on
the upper line.
• ENABLED/LOCKED is displayed on the lower line.
7. Press left (B) arrow to enable HEADER TILT
control switch.
Press right (C) arrow to lock HEADER TILT
control switch.
8. Press PROGRAM (A) to exit Programming Mode, or
press SELECT (D) to proceed to next WINDROWER
SETUP action.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.218: M105 Header Tilt Control Lock
Figure 4.219: M155 Header Tilt Control Lock
Figure 4.220: M205 Header Tilt Control Lock
248
Revision A