MacDon M Series Unloading And Assembly Instructions page 277

6. Press right (C) arrow to select YES. Press
SELECT (D).
• SENSOR INPUT is displayed on the upper line.
• HDR HEIGHT 1.23 V is displayed on the lower line.
7. Press left (B) or right (C) arrow to cycle between
individual sensor readers.
8. Press SELECT (D)
SENSORS? selection.
9. Press right arrow to select YES. Press SELECT.
10. Press PROGRAM to exit Programming Mode or press
SELECT to proceed to next DIAGNOSTIC MODE.
147962
CAB DISPLAY MODULE (CDM)
to skip to EXIT READ
Figure 4.256: M105 Header Sensors
Figure 4.257: M155 Header Sensors
Figure 4.258: M205 Header Sensors
263
Revision A