MacDon M Series Unloading And Assembly Instructions page 265

4. Press SELECT (B) until VIEW CONTROL LOCKS? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
5. Press right (A) arrow to select YES. Press SELECT (B).
DRAPER SPEED is displayed on the upper line.
• The control switch status is displayed on the lower
line. The hours displayed indicate when a switch
was enabled or locked.
HEADER TILT is displayed on the upper line.
• The control switch status is displayed on the lower
line. The hours displayed indicate when a switch
was enabled or locked.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.224: M105 Control Locks
Figure 4.225: M155 Control Locks
Figure 4.226: M205 Control Locks
251
Revision A