Performing Final Steps - MacDon M Series Unloading And Assembly Instructions

Self-propelled windrower

Hide thumbs Also See for M Series:

Table of Contents

5.13 Performing Final Steps

1. Remove plastic covering from cab display module (CDM), and seats after predelivery checks are complete.

2. Locate bag inside the cab containing the GPS mount kit, and install kit in accordance with the instructions in the

kit. If not installing kit, label bag (GPS Completion kit) and place kit in toolbox for safekeeping.

3. Remove decal (MD #166705) from windshield only

AFTER machine is delivered to the end user.

PERFORMING PREDELIVERY CHECKS

Figure 5.55: Windshield Decal (MD #166705)