MacDon M Series Unloading And Assembly Instructions page 217

4. Press SELECT (D) until HEADER CUT WIDTH?HDR
CUT WIDTH? #### is displayed on the upper line.
• Previous cutting width is displayed on the lower line.
5. Press left (B) or right (C) arrows to change the headers
cut width. Press SELECT (D).
6. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next WINDROWER
SETUP action.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.115: M105 Header Cut Width
Figure 4.116: M155 Header Cut Width
Figure 4.117: M205 Header Cut Width
203
Revision A