MacDon M Series Unloading And Assembly Instructions page 286

CAUTION
Check to be sure all bystanders have cleared the area.
7. Press SELECT (D) until HEADER DOWN/UP is
displayed on the lower line.
8. Press SELECT (D) until ACTIVATE HEADER HT is
displayed on the upper line.
• DOWN/UP is displayed on the lower line.
9. Press and hold left (B) arrow to lower header, or press
and hold right (C) arrow to raise header. Verify header
is functioning properly.
10. Press PROGRAM
Mode or press SELECT (D) to proceed to next
ACTIVATE FUNCTION.
147962
CAB DISPLAY MODULE (CDM)
(A) to exit Programming
Figure 4.276: M105 Header Height
Figure 4.277: M155 Header Height
Figure 4.278: M205 Header Height
272
Revision A