3.7 Attaching Hydraulics
The procedure for attaching hydraulics is different for 15-ft Draper Headers.
• If attaching a 15-ft. header, refer to section
• When attaching any other size header, refer to section
page 47
3.7.1 Attaching Hydraulics: 15-Foot Headers
To attach hydraulics to a 15-foot draper header, follow
these steps:
1. Disconnect return hose (A) at elbow on motor.
2. Install check valve tee (A) on elbow and reconnect
return hose (B) to tee (A).
3. Connect feed draper return line (C) from the
conditioner hose package onto the check valve.
169254
UNLOADING AND ASSEMBLY
3.7.1 Attaching Hydraulics: 15-Foot Headers, page 45
3.7.2 Attaching Hydraulics: All Headers Except 15-Foot,
45
Figure 3.38
Figure 3.39
Rev. D