MacDon M Series Unloading And Assembly Instructions page 301
Self-propelled windrower
Hide thumbs
Also See for M Series:
- Unloading and assembly instructions (95 pages) ,
- Assembly instructions manual (91 pages) ,
- Assembly instructions manual (117 pages)
Table of Contents
Advertisement
3. Press SELECT (B) until DIAGNOSTIC MODE? is
displayed in upper line.
• NO/YES is displayed on the lower line.
4. Press right (A) arrow to select Yes. Press SELECT (B).
5. Press SELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
6. Press right (A) arrow to select YES. Press SELECT (B).
CAUTION
Check to be sure all bystanders have cleared the area.
7. Press SELECT (C) until REEL DRIVE ON appears on
the lower line.
8. Press and hold right (B) arrow to activate reel drive.
Verify reel is functioning properly.
9. Release right (B) arrow to deactivate reel drive.
10. Press
PROGRAM
Mode or press SELECT (C) to proceed to next
ACTIVATE FUNCTION.
147962
CAB DISPLAY MODULE (CDM)
(A)
to
exit
Programming
Figure 4.312: Diagnostic Functions
Figure 4.313: Functions
Figure 4.314: Reel Drive
287
Revision A
Advertisement
Table of Contents
Troubleshooting
