MacDon M Series Unloading And Assembly Instructions page 182

5. Press SELECT (D) until BACKLIGHTING is displayed
on the upper line.
• Default setting is displayed on the lower line.
6. Press left (B) or right (C) arrows to adjust
display backlighting.
7. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next CAB DISPLAY
SETUP? action.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.36: M105 Backlighting
Figure 4.37: M155 Backlighting
Figure 4.38: M205 Backlighting
168
Revision A