MacDon M Series Unloading And Assembly Instructions page 81

12. Ensure the front of the platform is contacting the
guide (A).
13. Adjust the platform horizontally with the 1/2 x 2-1/4 in.
bolt (A) as required.
14. Relocate the steering arm (A) into either of the other
holes on the bracket (B), if major adjustment is
required.
15. Tighten the three main beam attachment bolts to
108 N·m (80 ft·lbf).
16. M155 and M205 only: Repeat procedure to install the
right-hand platform.
147962
ASSEMBLING THE WINDROWER
Figure 3.95: Left-Hand Platform – Guide
Figure 3.96: Left-Hand Platform – Main Beam
Figure 3.97: Left-Hand Platform – Steering Arm
67
Revision A