MacDon M Series Unloading And Assembly Instructions page 233

4. Press SELECT (C) until SET ENGINE ISC RPM? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
5. Press right (B) arrow to select YES. Press SELECT (C).
• PRESS HAZARD TO SET is displayed on the
upper line.
• ISC RPM #### is displayed on the lower line.
Table 4.1 ISC Settings
ISC and RPM
7
Off
High Idle (M155) 8
High Idle (M205)
NOTE:
The previously selected ISC rpm will be flashing.
7. Off is always used when the header is not engaged.
8. Off does not appear on menu selection but is used when the header is not engaged.
9. Default Setting
147962
CAB DISPLAY MODULE (CDM)
1 2 3
9
2200 2000 1800
2000 1800 1600
Figure 4.151: M155 Engine ISC RPM
Figure 4.152: M205 Engine ISC RPM
219
Revision A