MacDon M Series Unloading And Assembly Instructions page 228

4. Press SELECT (D) until AUGER HDR REEL SPD? is
displayed on the upper line.
• RPM/MPH is displayed on the lower line.
5. Press left (B) or right (C) arrow to select either Imperial
(mph) or Metric (km/h) units. Press SELECT (D).
6. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next WINDROWER
SETUP action.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.139: Auger Reel Speed
214
Revision A