Testing The Header Tilt Activate Function Using The Cab Display Module (Cdm) - MacDon M Series Unloading And Assembly Instructions
Self-propelled windrower
Hide thumbs
Also See for M Series:
- Unloading and assembly instructions (95 pages) ,
- Assembly instructions manual (91 pages) ,
- Assembly instructions manual (117 pages)
Table of Contents
Advertisement
4.8.3 Testing the Header Tilt Activate Function Using the Cab Display
Module (CDM)
NOTE:
• Displaying center-link position on cab display module (CDM) requires installation of the optional Expansion
Module (MD #B4666). For more information, refer to the windrower operator's manual or the windrower
technical manual.
• The header MUST be attached to the windrower to perform this procedure. The cab display module (CDM)
automatically adjusts its programming for each header.
• This procedure requires installation of the optional Hydraulic Center-Link (MD #B4650) and optional Auxiliary
Valve (MD #B5269).
• The engine MUST be running to perform this procedure.
147962
CAB DISPLAY MODULE (CDM)
278
Revision A
Advertisement
Table of Contents
Troubleshooting
