Activating The Header Tilt Control Lockout - MacDon M Series Unloading And Assembly Instructions

4.5.8 Activating the Header Tilt Control Lockout

NOTE:
• The header MUST be attached to the windrower to perform this procedure. The cab display module (CDM)
automatically adjusts its programming for each header.
• This procedure requires installation of the optional Hydraulic Center-Link (MD #B4650) and optional Auxiliary
Valve (MD #B5269).
• Displaying center-link position on cab display module (CDM) requires installation of the optional Expansion
Module (MD #B4666). For more information, refer to the windrower operator's manual or the windrower
technical manual.
147962
CAB DISPLAY MODULE (CDM)
245
Revision A