MacDon M Series Unloading And Assembly Instructions page 296

CAUTION
Check to be sure all bystanders have cleared the area.
9. Press SELECT (D) until HDR TILT IN/OUT is displayed
on the lower line.
10. Press SELECT (D) until ACTIVATE HDR TILT is
displayed on the upper line.
• IN/OUT is displayed on the lower line.
11. Press and hold left (B) arrow to decrease header tilt.
Press and hold right (C) arrow to increase header tilt.
Verify header is functioning properly.
12. Press PROGRAM
Mode or press SELECT (D) to proceed to next
ACTIVATE FUNCTION.
147962
CAB DISPLAY MODULE (CDM)
(A) to exit Programming
Figure 4.300: M105 Header Tilt Angle
Figure 4.301: M155 Header Tilt Angle
Figure 4.302: M205 Header Tilt Angle
282
Revision A