MacDon M Series Unloading And Assembly Instructions page 134

12. Remove lynch pin from clevis pin (A) in stand (B).
13. Hold stand (B) and remove pin (A).
14. Move stand (B) to storage position by inverting and
relocating onto bracket as shown.
pin (A) and secure with lynch pin.
15. Remove clevis pin from storage position (B) in linkage
and insert into hole (A) to engage float springs. Secure
with hairpin.
16. Disengage safety prop by turning lever (A) downwards
to release and lower stop until lever locks into
vertical position.
17. Repeat for opposite safety prop.
147962
ASSEMBLING THE WINDROWER
Reinsert clevis
Figure 3.214: Header Stand
Figure 3.215: Header Float Linkage
Figure 3.216: Safety Prop
120
Revision A