Checking Windrower Startup - MacDon M Series Unloading And Assembly Instructions

5.11.3 Checking Windrower Startup

CAUTION
Check to be sure all bystanders have cleared the area.
1. Start the engine. For instructions, refer to
NOTE:
The brakes should engage and the machine should not move after engine start-up.
2. Ensure the steering wheel is centered. Move ground
speed lever (GSL) (A) straight out of N-DETENT
(neither forward nor reverse). The machine should
not move.
3. Check that the steering wheel is free to move.
IMPORTANT:
If the machine does not function as described,
the system requires adjustment. Refer to the
windrower technical manual.
147962
PERFORMING PREDELIVERY CHECKS
3.15 Starting Engine, page
337
84.
Figure 5.25: M155/M205 Operator Console
Figure 5.26: M105 Operator Console
Revision A