MacDon M Series Unloading And Assembly Instructions page 234

6. Press right (C) arrow to cycle between rpm options.
Press HAZARD (B) to set.
7. Press Select (D).
• EXIT ENGINE ISC? is displayed on the upper line.
• NO/YES is displayed on the lower line.
8. Press right (C) arrow to select YES. Press
SELECT (D).
9. Press PROGRAM (A) to exit Programming Mode.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.153: M155 ISC RPM
Figure 4.154: M205 ISC RPM
220
Revision A