MacDon M Series Unloading And Assembly Instructions page 306

9. Press SELECT (D) until REEL AFT/FORE is displayed
on the lower line.
10. Press and hold left arrow (B) to move reel backward,
or press and hold right arrow (C) to move reel forward.
Verify reel fore-aft is functioning properly.
11. Press PROGRAM
Mode or press SELECT (D) to proceed to next
ACTIVATE FUNCTION.
12. Press SELECT (D) until ACTIVATE REEL F/A is
displayed on the upper line.
• FORE/AFT is displayed on the lower line.
13. Verify reel fore-aft is functioning properly.
a. Press and hold left (B) arrow to move reel
forward. Press and hold right (C) arrow to move
reel backward.
b. Press PROGRAM (A) to exit Programming
Mode or press SELECT (D) to proceed to next
ACTIVATE FUNCTION.
147962
CAB DISPLAY MODULE (CDM)
(A) to exit Programming
Figure 4.324: M105 Reel Fore-Aft
Figure 4.325: M155 Reel Fore-Aft
Figure 4.326: M205 Reel Fore-Aft
292
Revision A