6. Press SELECT (D) until DRAPER SPEED is displayed
on the upper line.
• ENABLED/LOCKED is displayed on the lower line.
7. Press left arrow (B) to enable DRAPER SPEED control
switch, or press right arrow (C) to lock DRAPER
SPEED control switch.
8. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next WINDROWER
SETUP action.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.182: M105 Draper Control Lock
Figure 4.183: M155 Draper Control Lock
Figure 4.184: M205 Draper Control Lock
233
Revision A