MacDon M Series Unloading And Assembly Instructions page 68

13. Retrieve long hose (MD #119328 [white tie]) (A) and
route through the hole in the left-hand frame.
14. Remove caps on hose (A) and valve block fitting (white
tie) (B), and make connection. Tighten fitting.
15. Remove the cap from the fitting with yellow tie (A) on
the valve block from the inboard side of the frame.
147962
ASSEMBLING THE WINDROWER
Figure 3.63: Hose Routing
Figure 3.64: Valve Block
Figure 3.65: Valve Block
54
Revision A