3.7 Attaching Hydraulics
The procedure for attaching hydraulics is different for 15-foot draper headers.
• If attaching a 15-foot header, refer to
• When attaching any other size header, refer to
3.7.1 Attaching Hydraulics: 15-Foot Headers
To attach hydraulics to a 15-foot draper header, follow
these steps:
1. Disconnect return hose (A) at elbow on motor.
2. Install check valve tee (A) on elbow and reconnect
return hose (B) to tee (A).
3. Connect feed draper return line (C) from the
conditioner hose package onto the check valve.
214033
UNLOADING AND ASSEMBLY
3.7.1 Attaching Hydraulics: 15-Foot Headers, page
3.7.2 Attaching Hydraulics: All Headers Except 15-Foot, page
Figure 3.38: Return Hose
Figure 3.39: Check Valve and Hoses
31
31.
33.
Revision A