MacDon M Series Unloading And Assembly Instructions page 188

4. Press right (B) arrow to select YES. Press SELECT (C).
• TO CALIBRATE SELECT is displayed in upper line.
5. Press left (A) or right (B) arrow until HEADER HEIGHT
is displayed on the lower line. Press SELECT (C).
• CALIBRATING HEIGHT is displayed on the
upper line.
• RAISE HEADER HOLD is displayed on the
lower line.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.51: M105 Header Height Calibration
Figure 4.52: M155 Header Height Calibration
Figure 4.53: M205 Header Height Calibration
174
Revision A