MacDon M Series Unloading And Assembly Instructions page 176

5. Press SELECT (D) until DISPLAY UNITS? is displayed
on the upper line.
• Default setting is displayed on the lower line.
6. Press left (B) or right (C) arrow to select either METRIC
or IMPERIAL speed display.
7. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next CAB DISPLAY
SETUP? action.
147962
CAB DISPLAY MODULE (CDM)
Figure 4.18: M105 Display Units
Figure 4.19: M155 Display Units
Figure 4.20: M205 Display Units
162
Revision A