K&R GT600-4T132G User Manual page 84

4. Operating Panel (Keypad & Display)
4.2.4 MF.K Key Function
Function of the
01. You can switch over command source or frequency reference direction of the drive, and
implement forward/reverse jog through this key in either STOP or RUNNING status.
Function Code Parameter Name Setting Range
F7-01
4
4.2.5 Saving and Restoring Settings
After you change value of any function parameter, the drive saves the new value locally so
that it remains effective when you power on the drive next time. The drive also retains alarm
information and cumulative running time data.
The drive allows you to make a separate external backup of parameter settings. This feature
allows you to load a set of parameter settings during commissioning, or to restore a set of
parameter settings after completing a maintenance or repair operation on the drive.
You can also restore default parameter settings, or clear running data by using function
parameter FP-01.
Function Code Parameter Name
FP-01
- 82 -
key on the LED operating panel can be set via function parameter F7-
MF.K
0: Disabled
key
MF.K
1: Switchover
function
between
selection
operating panel
and terminal/
communication
2: Forward/
Reverse RUN
switchover
3: Forward jog
4: Reverse jog
Setting Range
Parameter 0: No operation
initialization
1: Restore default settings except motor parameters
2: Clear records including errors
4: Back up parameters
501: Restore user's backup parameters
Description
The key has no function.
F0-02 = 0, there is no effect after you
press the key.
MF.K
F0-02 = 1, command source can be
switched over between terminal and
operating panel through the
key.
F0-02 = 2, command source
can be switched over between
communication and operating panel
through the key.
MF.K
Frequency reference direction can
be switched over through the
key. This function is valid only when
command source is operating panel.
Forward jog of the drive can be
implemented through the
MF.K
This function is valid only when
command source is operating panel.
Forward jog of the drive can be
implemented through the
MF.K
This function is valid only when
command source is operating panel.
Default
0
MF.K
MF.K
key.
key.
Default
0