K&R GT600-4T132G User Manual page 37

Step 2: Secure the fixing beam and reserve mounting holes
The cross section of the nine-folding AL cabinet is shown in the following figure.
Figure 2-15 Cross section of the nine-folding AL cabinet
Fixing beam
GT600
Nine-folding
AL cabinet
When the drive of GT600250G(-L) to GT600450G(-L) is mounted in the nine-folding AL cabinet
of 600 mm deep, the fixing beam must fold inwards. When the drive is mounted in the cabinet of
800 mm deep, folding inwards is not required.
Figure 2-16 Folding inwards of the fixing beam in the cabinet of 600 mm deep
v
If the cabinet has front door and back door, the cabinet of 600 mm deep is too small
Note
to accommodate the drive of GT600G250G(-L) to GT600G450G(-L). In this case,
the cabinet of 800 mm deep is recommended.
Fixing beam
800 mm
600 mm
Front door
2. Mechanical Installation
Nine-folding AL
43.5 mm
43.5 mm
Fixing beam
Nine-folding
GT600
2
- 35 -