K&R GT600-4T132G User Manual page 255

■
Extension PC Card (GT60PC1)
GT60PC1 card is designed with the PLC function, which enables the drive to have the
PLC (user programmable) function. The card can read special variables of drive besides
standard function codes and is more advantageous than combination of PLC and AC
drive.
GT60PC1 is compatible with K&R's PLC programming environment. On the condition that
program capacity and peripheral devices do not exceed range of GT60PC1,
programs of the user can be downloaded to GT60PC1 without modification.
GT60PC1 has the following I/O terminals and communication interface.
CN1
AI AO
J2
CN4
PGND
PE AI3
Table 8-5 Terminal descriptions of the GT60PC1
Type Terminal
Power supply +24V-COM External +24V
OP1
RUN
J1
J3
ON
1 2 3 4 5 6
AO2 GND 485+ 485-CGND DI6 DI7 DI8 DI9 DI10 COM OP1 +24V
Terminal Name
power supply
Digital input
power terminal
8. Peripherals and Options
STOP
J7
J9
J4
S1
OP1
CN6
7 8
Function Description
Provide +24 V power supply to an external
unit.
Generally used to supply DI/DO terminals
and external sensors.
Max. output current: 170 mA
Connect to +24V by the jumper J8 by
default.
When applying an external power supply,
remove jumper J8 to disconnect OP1 from
+24V and connect OP1 to external power
supply.
J8
8
- 253 -