9. Maintenance and Inspection
■
Removing and Installing the Fan of a Plastic Housing (GT600-4T18.5GB to GT600-4T37GB)
Removal
1. Depress the fan cover hook and take the fan cover
off the top of the drive.
Installing
1. Plug in the fan power cable .
Fan power
socket
3. Insert the two guide pins into the square holes and
then press in the hook.
Guide pin
Square
hole
2. Pull the fan upward and disconnect
the pluggable connector of power cable.
Fan power
cable connector
2. Install the fan into the drive and ensure
that the mounting pins are aligned.
4. Keep air flow direction upward.
Look down from the
back of the drive.
Mounting
pin x 4
10
- 285 -