K&R GT600-4T132G User Manual page 266

8. Peripherals and Options
8
- 264 -
●
DIP switch setting
Profibus-DP Communication Slave Address Setting Slave
1 2 3
Keep the 0 0
OFF state
0 0
(OFF:
GT60DP2).
0 0
0
...
1 1
1 1
1 1
●
Indicators
Indicator Indication
D4 in red Power supply
indicator
D3 in yellow DP card
and master
communication
indicator
D2 in green DP card
and drive
communication
indicator
4 5 6 7 8
0 0 0 0 0
0 0 0 0 1
0 0 0 1 0
0 0 0 1 1
1 1 1 0 1
1 1 1 1 0
1 1 1 1 1
State Description
ON The drive is powered on.
OFF The drive is not powered on or DP card is installed
improperly.
ON Communication between DP card and the master
is normal.
OFF There is no communication between DP card and
the master (check PROFIBUS cable connection
and setting of station No.).
Flash The master does not operate or error occurs on
communication between DP card and the master .
ON Communication between DP card and the drive is
normal.
OFF Communication between DP card and the drive
fails (check the baud rate setting).
Flash Interference exists on communication between DP
card and the drive or extension card address is
not within the rang of 1 to 125.
DIP Switch
Address
Reserved
S1
ON
1
1 2 3 4 5
2
1 2 3 4 5
3
... Reserved DP slave
address setting
123
124
125
6 7 8
6 7 8