K&R GT600-4T132G User Manual page 178

6. Description of Parameters
6.8.4 Motor 2 Parameters
The drive supports driving two motors at different time. For the two motors, you can:
●
●
●
●
●
Motor 2 parameters are defined the same as motor 1 parameters. For details on motor 1
parameters, see descriptions of these parameters in
You can select the desired motor parameter group in F0-24 or via a DI terminal
1. Select the desired motor parameter group in F0-24.
2. Select the desired motor parameter group via a DI terminal.
6
- 176 -
Set motor nameplate parameters respectively
Perform motor auto-tuning respectively
Select V/F control or vector control respectively
Set encoder-related parameters respectively
Set parameters related to V/F control or vector control independently
Function Code Parameter Name
F0-24 Motor parameter group
selection
Set any DI (F4-00 to F4-09) for function 41 "Motor selection". If the DI is inactive, motor
parameter group 1 is selected. If the DI is active, motor parameter group 2 is selected.
Function Code
Any of F4-00 to F4-09
●
If any of F4-00 to F4-09 is set for function 41 "Motor selection", DI terminal
Note
overrides F0-24. If none of F4-00 to F4-09 is set for function 41 "Motor
selection", motor selection is determined by F0-24.
●
Switchover of two groups of motor parameters is prohibited during drive
running. Otherwise, the drive detects Err41.
Function Parameter Name
Code
A2-00 Motor type selection
A2-01 Rated motor power
A2-02 Rated motor voltage
A2-03
Rated motor current
A2-04 Rated motor frequency 0.01 to max. frequency
A2-05 Rated motor speed
A2-06 Stator resistance
A2-07 Rotor resistance
Setting Range
0: Motor parameter group 1
1: Motor parameter group 2
Parameter Name
DIx function selection
Setting Range
0 to 1
0.1 to 1000.0 kW
1 to 2000 V
0.01 to 655.35 (AC drive power ≤ 55 kW)
0.1 to 6553.5 (AC drive power > 55 kW)
1 to 65535
0.001 to 65.535 (AC drive power ≤ 55 kW)
0.0001 to 6.5535 (AC drive power > 55 kW)
0.001 to 65.535 (AC drive power ≤ 55 kW)
0.0001 to 6.5535 (AC drive power > 55 kW)
.
Setting Description
41 Motor selection
Default
0
Model
dependent
Model
dependent
Model
dependent
Model
dependent
Model
dependent
Auto-tuning
parameter
Auto-tuning
parameter
Default
0