K&R GT600-4T132G User Manual page 48

3. Electrical Installation
■
3
- 46 -
Cable Dimensions and Tightening Torque
●
Data and models recommended in this section are for reference only.
Note
The user selected cable diameter must not be larger than the terminal
width in the following figures.
●
Selection of IEC cables is based on:
– Standards EN 60204-1 and IEC 60364-5-52
– PVC insulation
– 40° C ambient temperature and 70° C surface temperature
– Symmetrical cable with copper mesh shield
– A maximum of 9 cables are allowed in a
●
For North America, the recommended cables in the preceding table must
be copper wires rated 600 V, 75° C.
Figure 3-1 Terminal dimensions of GT600-4T18.5GB/22GB
16
Table 3-2 Recommended cable dimensions and tightening torque of GT600-4T18.5GB/22GB
AC Drive Model
Rated
Input
Current (A)
GT600- 49.5
4T18.5GB
GT600-4T22GB 59
cable tray.
136
15
Power Crimp Ground
Input/Output Terminal Cable
Cable Model
2
3 x 10 mm 8-6 10 mm
3 x 6 AWG 8 AWG
2
3 x 16 mm 14-6 16 mm
3 x 4 AWG 8 AWG
17 16
Crimp Tightening Screw
Terminal Torque Spec.
Model (N· m)
2
8-6 4.0 M6
2
8-6 4.0 M6