K&R GT600-4T132G User Manual page 18

1. Product Information
Item
1
RUN
- 16 -
Virtual I/O
Timing control
Dual-motor switchover
Multiple field buses
Motor overheat protection
Multiple encoder types
User programmable function
Advanced background software
Command source
Main frequency reference setting
channel
Auxiliary frequency reference setting
channel
Input terminals
Description
Five groups of virtual digital input/outputs (DI/DO)
support simple logic control.
Time range: 0.0 to 6500.0 minutes
The drive have two groups of motor parameters and can
control up to two motors.
The drive supports four field buses:
Modbus-RTU
PROFIBUS-DP
CANlink
CANopen
Option: The optional input/output (I/O) extension
card allows AI3 to receive a signal from the motor
temperature sensor input (PT100, PT1000) to implement
motor overheat protection.
The drive supports a range of different encoder types:
Differential encoder
Open-collector encoder
Resolver
Option: The optional programming card supports
secondary development in a programming environment
compatible with the K&R programmable logic controller
(PLC).
Software in the drive allows users to configure
some operating parameters, and provides a virtual
oscilloscope display that shows system status.
Allows different methods of switching between command
sources:
Operating panel (keypad & display)
Terminal I/O control
Serial communication
Supports up to 10 frequency reference setting channels
and allows different methods of switching between
frequency reference setting channels:
Digital setting
Analog voltage reference
Analog current reference
Pulse reference
Communication reference
Supports up to 10 auxiliary frequency sources, and
allows fine tuning of the auxiliary frequency and main &
auxiliary calculation.
Standard:
Five digital input (DI) terminals, one of which supports
up to 100 kHz high-speed pulse inputs.
Two analog input (AI) terminals, one of which supports
only 0 to10 V input, and the other supports 0 to 10 V and
4 to 20 mA current input.
Expanded capacity:
Five digital input (DI) terminals.
One AI terminal that supports –10 to 10 V voltage input
and PT100/PT1000 motor temperature sensor inputs.